![background image](http://html2.mh-extra.com/html/hand-held-products/scanteam-2070/scanteam-2070_system-manual_3568137092.webp)
4 - 2
When the key is depressed and the trigger goes from released state to the pulled
state, the character advances to the next selection, and you receive audible
feedback.
For example, if you needed to key in the following data identifier for a bar code
message or a part number: 1Z12345. Press the “1” key, press and hold the “9”
and pull the trigger twice. Then key in the remaining numbers.
Enter/Backspace
The
ENTER
and
BACKSPACE (BK)
keys operate as those keys on a personal
computer. Keyed data does not return to the script application until the
ENTER
key is pressed.
BK
deletes the character that precedes the cursor and moves
the cursor back one position. Pressing and holding
BK
for three seconds deletes
all of the input characters. If the cursor is in the first position when the BK key is
pressed, the cursor will not move.
Keypad Macros
Up to eleven keypad macro strings may be set up to save a sequence of keypad
strokes, which later can be recalled by pressing
FUNCTION (FN)
and a digit key
(0-9) or the asterisk (the wildcard key). Keypad macro strings can be used in
combination with individual keyed characters. See "Application Work Group
Selection" on page 5-3 for macro programming instructions.
Note: The scanner must be associated to a base (ST2070-5) to use a macro.
Arrow Keys
Up and down arrow keys are located below the display. These keys are used to
scroll through the information on the display. They are also used in making the
contrast of the screen darker or lighter and incrementing/decrementing values.
The function of the arrow keys is script dependent.
Scrolling
Vertical Line Scrolling
The IMAGETEAM 3875 is shipped with an application that shows the history of
the past ten scans on the display. After you scan a bar code and the information
is successfully communicated to the base, the bar code information appears on
the top line of the display. Information from future scans appears at the top of the
display while previous lines move down one line. The arrow keys may be used
to scroll up and down through the scan history. Once a line is selected, it is
highlighted.
Summary of Contents for SCANTEAM 2070
