Hand Held Products SCANTEAM 2070, System Manual

Page: 194 / 232

9 - 6
Charge Pack Specifications (CLESS/NIMH/S)
The battery is a rechargeable Nickel Metal Hydride (NiMH) pack. The unique
design of the battery allows the charge pack to be directly charged in a two prong
120 volt wall outlet commonly used in North America. For other parts of the world
with different voltages and frequencies, a prong adapter or universal charge strip
is needed. While the charge pack may be charged directly with 240 volts, the
universal charge strips provide the method to physically adapt to the various
power plug and socket configurations.
The charge pack has an LED indicator that displays charging and fully-charged
conditions. To condition a new battery, we recommend fully charging and
discharging the pack approximately two times so it can reach its full-rated
capacity and is conditioned for full capacity and longer life. (See "Charge Pack
Recommendations" on page 1-4.)
Recommended Storage
Note: When storing a charge pack for longer than 6 months, recharge at least
once a year (once every 6 months if possible) to prevent self-discharge
from causing a drop in battery performance, or electrolyte leakage.
Parameter Specification
Number of scans between charges
IT3870/ST5770
18,000
IT3875 13,680
Expected hours of operations
IT3870/ST5770 (720 scans per hour) 25 hours
IT3875 (720 scans per hour) 19 hours
Battery Charging (Input) Voltage 85 to 264 VAC @ 47 to 63 Hz
Capacity 1200 mAh
Charge time from full discharge to full charge 6 hours (maximum)
Capacity after 500 charges/discharge cycles At least 80% of original capacity
# of mechanical contact insertions 6000
Storage Time Storage Temperature
Up to a month -4° F to +131° F (-20° C to +55° C)
Up to 3 months
-4° F to +113° F (-20° C to +45° C)
Up to a year -4° F to +95° F (-20° C to +35° C)
Longer than a year
+50° F to +77° F (+10° C to +25° C)