Hand Held Products SCANTEAM 2070, System Manual

Page: 55 / 232

2 - 11
Automatic Direct Connect: When Emulate External Keyboard has been
selected (page 2-9), Automatic Direct Connect Mode keeps the integrated
keyboard from becoming permanently disabled. (This selection disables the
keyboard for the duration of the bar code transmission.)
Output Delays Selection
This selection provides control of the time delays between data output by the
cordless system to the host terminal. The actual delay is 5 milliseconds
multiplied by the programmed value (00 - 99). Default = 00.
Intercharacter Delay is the time delay between data characters output by the
cordless system to the host terminal.
Interfunction Delay is the time delay between function (key) codes output by the
cordless system to the host terminal.
Intermessage Delay is the time delay between data messages or records output
by the cordless system to the host terminal.
Example: You need a 45 millisecond delay. Scan the Intercharacter Delay bar
code. Scan “0,” “9,” and Save on the Programming Chart (09 x 5ms = 45ms).
1. A two-digit number and Save are required after scanning this programming bar code.
Refer to the Programming Chart (inside back cover).
Automatic Direct Connect Mode On
*Automatic Direct Connect Mode Off
Intercharacter Delay (x5mS)
1
Interfunction Delay (x5mS)
1
Intermessage Delay (x5mS)
1