Hand Held Products SCANTEAM 2070, System Manual

Page: 99 / 232

4 - 9
Run Custom Script (IT3875XXX-X2-1 and ST2070-5 only)
This selection instructs the scanner to run the custom script that is designated for
the current work group. The script must first be loaded into the ST2070-5 using
IQ App Loader or IQ App Designer. The IT3875XXX-X2-1 supports VersaCode,
a new scripting language, that is designed for data capture applications.
The IT3875 supports three different programming models: scanner resident,
host commands, and remote procedure calls. In the scanner resident model,
VersaCode programs are stored in the base unit and run in the scanner. In the
host command model, VersaCode commands are sent from the host to the
scanner through the base. In the remote procedure calls model, VersaCode
routines are resident in the scanner and activated using host commands. For
additional information, please refer to the VersaCode Language Reference
User’s Guide.
Note: If custom script is selected and no custom script has been loaded, the
scanner is operational; however, nothing appears on the display and
keypad input is not allowed.
Instead of selecting the Custom script from the display, you may scan the
following bar code.
IT3875XXX-X2-1
Run Custom Script