Hand Held Products SCANTEAM 2070, System Manual

Page: 104 / 232

5 - 2
To add a new cordless scanner to an established group, associate the scanner
to the base and scan the application work group number. The scanner will
automatically reconfigure to operate and send data to the host system according
to that group’s programmed selections. Any programming selections you
change or make with one cordless scanner will affect all the scanners in the
same work group.
Note: The IT3875 scanner’s properties of contrast setting, backlight setting, and
operating script are scanner selected only. These properties are not part
of an application work group.
Note: To program a group’s parameters, you must first scan the group number
and then the programming selections (prefix, suffix, data formatter, etc.).
The parameters can’t be programmed first and then “made” a group by
scanning an application work group number.
To remove a scanner associated with a base unit, use the Remove Scanner
Selection on page 5-11. For instance, if nine scanners are associated with a
base (the maximum number) and you want to add a new scanner, you will need
to remove one scanner from the network. After removing one scanner by using
the Remove Scanner programming bar code, add the new scanner by scanning
the association bar code on the base unit.