Hand Held Products SCANTEAM 2070, System Manual

Page: 87 / 232

3 - 25
Auxiliary Port Input Communications
The Aux Data Editor Commands are:
• Scan F 4 (see page 3-25 for a description).
• Scan 3 0 (hex value for 0).
• Scan 0 3 (indicating the 0 should be sent 3 times).
• Scan F 1 to send the data, then 0 0 (the hex value for NUL).
• Scan Save to end the Aux Data Formatting.
Aux Format Editor Commands
Send Commands
F1 Send all characters followed by “xx” key or function code, starting from cur-
rent cursor position. Syntax = F1xx (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 3-20.)
F2 Send “nn” characters followed by “xx” key or function code, starting from
current cursor position. Syntax = F2nnxx (nn stands for the numeric value
(00-99) for the number of characters and xx stands for the hex value for an
ASCII code. See Hex to ASCII Conversion chart, page 3-20.)
F3 Send up to but not including “ss” character (Search and Send) starting from
current cursor position, leaving cursor pointing to “ss” character followed by
“xx” key or function code.
Syntax = F3ssxx (ss and xx both stand for the
hex values for ASCII codes, see Hex to ASCII Conversion chart, page 3-
20.)
F4 Send “xx” character “nn” times (Insert) leaving cursor in current cursor posi-
tion. Syntax = F4xxnn (xx stands for the hex value for an ASCII code, see
Hex to ASCII Conversion chart, page 3-20, and nn is the numeric value
(00-99) for the number of times it should be sent.)
E9 Send all but the last “nn” characters, starting from the current cursor posi-
tion. Syntax = E9nn (nn is the numeric value (00-99) for the number of
characters that will not be sent at the end of the message.)
Move Commands
F5 Move the cursor ahead “nn” characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved ahead.)
F6 Move the cursor back “nn” characters from current cursor position.
Syntax = F6nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved back.)
F7 Move the cursor to the beginning of the data string. Syntax = F7 .
EA Move the cursor to the end of the data string. Syntax = EA .
Search Commands
F8 Search ahead for “xx” character from current cursor position, leaving cursor
pointing to “xx” character. Syntax = F8xx (xx stands for the hex value for
an ASCII code, see Hex to ASCII Conversion chart, page 3-20.)