Hakko Electronics Monitouch V9 Series, Connection Manual

Page: 419 / 430

20-24 20. Hitachi Industrial Equipment Systems
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Indirect Device Memory Designation
* In the expansion code, set which word, higher or lower, is to be read when a double-word address is specified.
PLC_CTL
Macro command “PLC_CTL F0 F1 F2”
Device Memory TYPE Remarks
d 00H Double-word, read only
F 01H Double-word
A 02H Double-word
b 03H Double-word
C 04H Double-word
H 05H Double-word
P 06H Double-word
T (trip history) 07H Double-word, read only
15 8 7 0
n + 0 Models (11 to 18) Device type
n + 1 Address No.
n + 2
Expansion code
* Bit designation
n + 3 00 Station number
15 8
0 0 0 0 0 0 0
0: 0 to 15 bits (lower)
1: 16 to 31 bits (higher)
Contents F0 F1 (= $u n) F2
Normal turn, reverse
turn or stop
command
1 - 8
(PLC1 - 8)
n Station number
3
n + 1 Command: 0
n + 2
0: Stop command
1: Normal turn command
2: Reverse turn command
Frequency command
setting
1 - 8
(PLC1 - 8)
n Station number
3 n + 1 Command: 1
n + 2 Frequency (0 to 400 Hz)