Hakko Electronics Monitouch V9 Series, Connection Manual

Page: 260 / 430

16.1 PLC Connection 16-7
16.1.2 SPB (N Mode) & FLEX-PC Series
Communication Setting
Editor
Communication setting
(Underlined setting: default)
PLC
Be sure to match the settings to those made under [Communication Setting] of the editor.
NS-RS1, NJ-RS2, NJ-RS4, NB-RS1
Mode setting
Station number setting
* The station number setting switch is not provided on NJ-RS2.
Transmission setting
Item Setting Remarks
Connection Mode
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 / 38400 bps
Data Length 7 / 8 bits
Stop Bit 1 / 2 bits
Parity None / Odd / Even
Target Port No. 0 to 31
MODE Setting Contents
1 RS-232C Command-defined asynchronous communication (non-procedure)
3 RS-485 Command-defined asynchronous communication (non-procedure)
ADDRESS Setting Contents
0 to 31
Station number
 10: the tens place
 1: the ones place
Switch Contents ON OFF E.g.) Editor Default Setting
8 Initializing method Switch Initial file
7 Parity Provided Not provided
6 Parity bit Even Odd
5 Data bit length 7 bits 8 bits
4 Stop bit length 1 bit 2 bits
Baud rate
19200 9600
3 ON ON
2 ON OFF
1 OFF ON
8
9
A
B
C
D
E
F
0
1
2
3
4 5
6
7
MODE
0
1
2 3
4
5
6
7 8
9
×
10
×
1
0
1
2 3
4
5
6
7 8
9
876
5
4
3
2
1
ON