manualshive.com logo in svg

Hach DR/850, Procedures Manual, Page: 360 / 460

Share
Download
Hach DR/850 Procedures Manual Download Page 360

360

5.

Add 2.0 mL of 

5.0 N Sodium 
Hydroxide Solution to 
the prepared sample. 
Swirl to mix. 

Note:

Use the 1-mL 

calibrated dropper 
provided.

6.

Pour the prepared 

sample into a graduated 
cylinder. Add deionized 
water rinsings from the 
flask to return the 
volume to 25 mL. 
Proceed with the 
appropriate reactive 
phosphorus test.

Note:

Results of the 

reactive phosphorus test at 
this point will include the 
orthophosphate plus the 
acid-hydrolyzable 
(condensed) phosphate. 
The condensed phosphate 
concentration is 
determined by subtracting 
the results of a reactive 
phosphorus test on an 
untreated sample from this 
result. Make sure both 
results are in the same 
chemical form and units.

PHOSPHORUS, ACID HYDROLYZABLE, 

continued

 

Summary of Contents for DR/850













































































































































































































































































































































































































































































Reviews:

No comments