Hach DR/850 Procedures Manual Download Page 117

Page: 117 / 460

117

Method 8021

CHLORINE, FREE

(0 to 2.00 mg/L)

For water, wastewater, and seawater

DPD Method

(Powder Pillows or AccuVac Ampuls)USEPA accepted for reporting

wastewater and drinking water analyses

Note:

This product has not been evaluated to test for chlorine and chloramines in medical

applications in the United States.

Using Powder Pillows

* Procedure is equivalent to USEPA method 330.5 for wastewater and Standard Method 4500-Cl G for
drinking water.

Enter the stored

program number for free
and total chlorine (Cl

)

powder pillows.

Press:

PRGM

The display will show:

PRGM ?

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Press:

9 ENTER

The display will show

mg/L, Cl2

and the

ZERO

icon.

Fill a sample cell

with 10 mL of sample
(the blank).

Note:

Samples must be

analyzed immediately and
cannot be preserved for
later analysis.

Note:

The SwifTest

Dispenser for Free
Chlorine can be used in
place of the powder pillows
in step 7.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

Summary of Contents for DR/850












































































































































































































































































































































































































































































Search results

Summary of Contents for DR/850

Reviews:

Hach DR/850, Procedures Manual, Page: 117 / 460

Search results

Summary of Contents for DR/850

Reviews: