manualshive.com logo in svg

Hach DR/850, Procedures Manual, Page: 309 / 460

Share
Download
Hach DR/850 Procedures Manual Download Page 309

309

ORGANIC CARBON, TOTAL, High Range, 

continued

Sampling and Storage

Collect samples in clean glass bottles. Rinse the sample bottle 
several times with the sample to be collected. Fill the bottle with 
minimum headspace before capping. Test samples as soon as 
possible. Acid preservation is not recommended. Homogenize 
samples containing solids to assure representative samples. 

17.

Tightly cover the 

vial assembly with the 
instrument cap.

18.

Press: 

ZERO

The cursor will move to 
the right, then the 
display will show:

0 mg/L C

19.

Wipe the sample 

vial assembly with a 
damp towel, followed by 
a dry one, to remove 
fingerprints or other 
marks.

20.

Place the 

sample

 

vial assembly in the 
adapter.

Push straight down on 
the top of the vial 
assembly until it seats 
solidly in the adapter.

21.

Tightly cover the 

vial assembly with the 
instrument cap.

22.

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L C will be 
displayed. 

Summary of Contents for DR/850













































































































































































































































































































































































































































































Reviews:

No comments