manualshive.com logo in svg

Hach DR/850, Procedures Manual, Page: 178 / 460

Share
Download
Hach DR/850 Procedures Manual Download Page 178

178

9.  

Place the prepared 

sample into the cell 
holder. Tightly cover the 
sample cell with the 
instrument cap.

10.  

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L fluoride will be 
displayed.

Note:

Use of the Standard 

Adjust feature with each 
new lot of reagent is highly 
recommended. See 
Accuracy Check following 
these steps.

Using AccuVac Ampuls

1.  

Enter the stored 

program number for 
fluoride (F

–

) AccuVac 

Ampuls.

Press: 

PRGM

The display will show:

PRGM ?

2.  

Press:

 

28 ENTER

The display will show 

mg/L, F 

and the

 

ZERO 

icon

.

3.  

Collect at least 40 

mL of sample in a 
50-mL beaker. Pour at 
least 40  mL of 
deionized water into a 
second beaker.

4.  

Fill an SPADNS 2 

Fluoride Reagent 
AccuVac Ampul with 
sample by breaking the 
tip on the bottom of the 
beaker.  Fill a second 
AccuVac Ampul with 
deionized water 
(the blank).

Note:

Keep the tip 

immersed while the ampule 
fills completely.

FLUORIDE, 

continued

 

Summary of Contents for DR/850













































































































































































































































































































































































































































































Reviews:

No comments