Grundig GD-RT-AC3004N User Manual Download Page 87

Page: 87 / 211

87 ENGLISH

Playback

6.1 Playing Back Record Files

6.1.1 Instant Playback

Play back the recorded video files of a specific channel in the live view mode. Channel switch is
supported.

Instant playback by channel

Choose a channel in the live view mode and click the

button in the quick settings toolbar.

Note:

In the instant playback mode, only record files recorded during the last five minutes on this

channel will be played back.

Instant Playback Interface

6.1.2 Playing Back by Normal Search

Playback by Channel

Enter the <Playback> interface.

Right-click a channel in live view mode and select <Playback> from the menu, as shown in the

following figure:

Summary of Contents for GD-RT-AC3004N




















































































































































































































Search results

Summary of Contents for GD-RT-AC3004N

Reviews:

Brands by name

Popular brands

Grundig GD-RT-AC3004N, User Manual

Search results

Summary of Contents for GD-RT-AC3004N

Reviews:

Brands by name

Popular brands