11 ENGLISH
‒
Supports cloud storage;
‒
S.M.A.R.T. and bad sector detection;
‒
HDD sleeping function;
‒
HDD property: redundancy, read-only, read/write (R/W);
‒
HDD group management;
‒
HDD quota management; different capacities can be assigned to different channels.
‒
For GD-RT-AT5016N, hot-swappable HDD supporting the RAID0, RAID1, RAID5, RAID 6 and
RAID10 storage schemes, and can be enabled and disabled on your demand. Also, 16 arrays
can be configured.
Recording, Capture and Playback
Note:
Capture is supported by GD-RT-AT5016N only.
‒
Holiday recording schedule configuration;
‒
Cycle and non-cycle recording modes;
‒
Normal and event video encoding parameters;
‒
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm
and event;
‒
Supports POS triggered recording for GD-RT-AT5016N;
‒
8 recording time periods with separated recording types;
‒
Supports Channel-Zero encoding;
‒
Main stream and sub-stream configurable for simultaneous recording;
‒
Pre-record and post-record for motion detection triggered recording, and pre-record time for
scheduled and manual recording;
‒
Searching record files and captured pictures by events (alarm input/motion detection);
‒
Customization of tags, searching and playing back by tags;
‒
Locking and unlocking of record files;
‒
Local redundant recording and capture;
‒
When HD-TVI, AHD, or HDCVI input is connected, the information including the resolution and
frame rate will be overlaid on the bottom right corner of the live view for 5 seconds. When
CVBS input is connected, the information such as NTSC or PAL will be overlaid on the bottom
right corner of the live view for 5 seconds.
‒
Searching and playing back record files by camera number, recording type, start time, end time,
etc.;
‒
Smart playback to go through less effective information;
‒
Main stream and sub-stream selectable for local/remote playback;
‒
Zooming in for any area during playback;
‒
Multi-channel reverse playback;
