151 ENGLISH
More Settings Interface
2.
Configure the remote Alarm Host, the <Server Port>, the <HTTP Port>, the Multicast IP>
and the <RTSP Port>.
<Alarm Host IP/Port>
: With a remote alarm host configured, the device will send the
alarm event or an exception message to the host when an alarm is triggered. The remote
alarm host must have the SCMS (Client Management System) software installed.
The <Alarm Host IP> refers to the IP address of the remote PC on which the SCMS (Client
Management System) software is installed and the <Alarm Host Port> must be the same
as the alarm monitoring port configured in the software (the default port is 7200).
<Multicast IP>
: The multicast can be configured to realize live view for more than the
maximum number of cameras through network. A multicast address spans the Class-D IP
range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP address ranging
from 239.252.0.0 to 239.255.255.255.
When adding a device to the SCMS (Client Management System) software, the multicast
address must be the same as the device’s multicast IP.
<RTSP Port>
: The RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control streaming
media servers.
Enter the RTSP port in the text field of
<RTSP Port>
. The default RTSP port is 554 and you
can change it according to different requirements.
<Server Port>
and
<HTTP Port>:
Enter the <Server Port> and the <HTTP Port> in the text
fields. The default Server Port is <8000> and the default HTTP Port is <80> and you can
change them according to different requirements.
