135 ENGLISH
10.5 Region Entrance Detection
This function may not be available in every recorder model.
The Region Entrance Detection function detects people, vehicles or other objects which enter a
pre-defined virtual region from outside the place and certain actions can be taken when the alarm
is triggered.
Steps:
1.
Go to
Menu > Camera > VCA
.
2.
Select the <Camera> to configure the VCA.
You can check the checkbox of
<Save VCA Picture> to save the captured pictures of the VCA
detection.
3.
Select the VCA detection type to <Region Entrance Detection>.
4.
Check the
<Enable> checkbox to enable this function.
5.
Click to configure the <Trigger Channel>, the <Arming Schedule>, <Linkage Action> and
<PTZ Linking> for the region entrance detection alarm.
6.
Click the
<Rule Settings> button to set the sensitivity of the region entrance detection.
<Sensitivity>:
Range [0-100]. The higher the value is, the more easily the detection alarm can
be triggered.
7.
Click
and draw a quadrilateral in the preview window by specifying four vertexes of the
detection region. Right-click to complete the drawing. Only one region can be configured.
You can use
to clear the existing virtual line and to re-draw it.
Note:
Up to 4 rules can be configured.
8.
Click <Apply> to save the settings.
10.6 Region Exiting Detection
This function may not be available in every recorder model.
The Region Exiting Detection function detects people, vehicles or other objects that exit a
pre-defined virtual region and certain actions can be taken when the alarm is triggered.
Note:
‒
Please refer to
Chapter 10.5 Region Entrance Detection
for operating steps to configure the
Region Exiting Detection.
‒
Up to 4 rules can be configured.
