171
Local HDD Settings Interface
7.
Select the Group number for the current HDD.
Note:
The default group No. for each HDD is 1.
8.
Click the
<OK> button to confirm the settings.
Confirm HDD Group Settings
9.
In the pop-up Attention box, click the <Yes> button to finish the settings.
14.3.2 Setting a HDD Property
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the
HDD property, please set the storage mode to Group (refer to steps1 to 4 of
Chapter 14.3.1 Setting
HDD Groups
).
An HDD can be set to <Read-Only> to prevent important recorded files from being overwritten
when the HDD becomes full in the overwrite recording mode.
When the HDD property is set to <Redundancy>, the video can be recorded both onto the
redundancy HDD and onto the R/W HDD simultaneously, so as to ensure high security and
reliability of video data.
Steps:
1.
Go to
Menu > HDD > General
.
