65 ENGLISH
Steps
1.
Go to
Menu>Record>Parameters
.
Record Parameters
2.
Set the parameters for recording.
1)
Select the <Record> tab to configure.
2)
Select a camera from the camera drop-down list.
3)
View the <Camera Resolution>.
Note:
When the HD-TVI, AHD, or HDCVI input is connected, you can view the information
including the input signal type, resolution and frame rate (e.g., 5 MP 20 Hz). When the
CVBS input is connected, you can view the information such as NTSC or PAL.
4)
Configure the following parameters for the <Main Stream (Continuous)> and the <Main
Stream (Event)>.
<Stream Type>: Set the stream type to <Video> or <Video & Audio>.
<Resolution>: Set the recording resolution.
Note:
‒
GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N support 5 MP and
4 MP resolutions on all of the channels.
‒
The 3 MP signal input is available for channel 1 of GD-RT-AC3004N, and for channel
1/2/3/4 of GD-RT-AC3016N.
‒
The analog signal inputs (HD-TVI, AHD, HDCVI, CVBS) and the IP signal input can be
recognized and connected automatically.
‒
If the configured encoding resolution conflicts with the resolution of the front-end
camera, the encoding parameters will adjust automatically to meet the front-end
