23 ENGLISH
2.
Getting Started
2.1 Starting Up and Shutting Down the DVR
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before you start
Check that the voltage of the extra power supply is the same with the DVR’s requirement, and the
ground connection is working properly.
Starting up the DVR:
Steps:
1.
Check that the power supply is plugged into an electrical outlet. It is HIGHLY recommended
that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2.
Turn on the power switch on the rear panel. The Power indicator LED should turn on,
indicating that the unit begins to start up.
3.
After startup, the Power indicator LED remains on.
Shutting down the DVR:
Steps:
1.
Go to
Menu > Shutdown
.
Shutdown Menu
2.
Click <Shutdown>.
3.
Click <Yes>.
4.
Turn off the power switch on the rear panel when the note appears.
Rebooting the DVR:
While in the Shutdown menu, you can also reboot the DVR.
Steps:
