119 ENGLISH
Detailed Event
3.
Set the alarm linkage actions. For details, see
Chapter 8.7 Setting Alarm Response Actions.
4.
Click <Apply> to save the settings.
8.7 Setting Alarm Response Actions
Alarm response actions will be activated when an alarm or an exception occurs, including <Full
Screen Monitoring>, <Audible Warning (buzzer) >, <Notify Surveillance Center>, <Send Email> and
<Trigger Alarm Output>.
Full Screen Monitoring
When an alarm is triggered, the local monitor (HDMI, VGA or CVBS monitor) displays in full screen
the video image from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched
at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to
Menu > Configuration > Live View
.
Auto-switch will terminate once the alarm stops and you will be taken back to the <Live View>
interface.
<Audible Warning>
Trigger an audible
beep
when an alarm is detected.
<Notify Surveillance Center>
This sends an exception or an alarm signal to the remote alarm host when an event occurs. The
alarm host refers to the PC that is installed with Remote Client.
Note:
The alarm signal will be transmitted automatically at the detection mode when a remote alarm
host is configured. Please refer to
Chapter 12.2.6 Configuring More Settings
for details of alarm
host configuration.
