49
REV-NORM
TH
direction of
throttle/brake servo. Set the
appropriate direction of rotation
using the INC+ or DEC- buttons.
SUB-TRIM Mode (Set-up Menu)
Note:
The menu point SUB-TRIM in the Set-up Menu provides
a convenient electronic means of adjusting the servo
centre position for steering, throttle and AUX (servo 3),
without affecting or restricting the range of the trim buttons
for the steering and throttle functions.
The travel of the reserved trim range of the Direct Trim
buttons is not affected by the SUB-TRIM function.
The SUB-TRIM function can be extremely useful, as it
allows you to make fine adjustments to the centre position
of the individual servos without having to carry out any
mechanical adjustments on the model.
Although the SUB-TRIM function is very convenient, we
strongly recommend that you only use it to carry out minor
trim corrections (up to 30 steps), otherwise undesirable
differential servo travels may occur.
If you need to make an adjustment of more than +/- 30
steps, we advise that you adjust the mechanical linkage
on the model.
REV-NORM AUX Servo Reverse,
Function 3 REV-NORM
L/F
R/B
MI
RATE
EXP
TRIM
EP
REV-NORM
AUX
direction of
servo 3. Set the appropriate
direction of rotation using the
INC+ or DEC- buttons.
RATE
TRIM
L/F
R/B
AUX
Direction of servo rotation (Servo Reverse)
To reach the Servo Reverse Menu switch the transmitter
ON and press the MODE button repeatedly until the REV-
NORM ST Menu appears on the screen. Use the CHANNEL
button to select the servo function ST, TH or AUX.
REV-NORM ST Servo Reverse,
Steering REV-NORM
REV-NORM
ST
direction of
steering servo. Set the
appropriate direction of rotation
using the INC+ or DEC- buttons.
ST
TRIM
L/F
%
REV-NORM TH Servo Reverse,
Throttle/brake REV-NORM
-
REV-NORM
-
REV-NORM
TH
X
EXP
TRIM
L/F
%
REV-NORM
-
Accessing the Servo Reverse Menu
This is the procedure for reaching the Servo Reverse
Menu:
1. Switch the transmitter ON.
2. Press the MODE button repeatedly until the Set-up
Menu REV-NORM TH appears on the screen.
3. Use the CHANNEL button to select the servo function
you wish to reverse: ST (steering), TH (throttle/brake)
or AUX (servo function 3).
4. Use the INC+ or DEC- buttons to set the appropriate
direction of servo rotation (REV-NORM).
5. Switch the transmitter OFF/ON briefly to store the set
values, and to revert to the base screen display.
Explanation:
The Servo Direction menu point is a very useful facility,
particularly when you are setting up a new model. Servo
reverse changes the direction of rotation of the servo
concerned relative to the movement of the transmitter
control. The servo reverse function is available for the
channels Steering, Throttle/brake and AUX (3rd servo
function).
To reach the SUB-TRIM menu switch the transmitter ON
and press the MODE button repeatedly until the TRIM STS
Menu appears on the screen. Select the desired servo
function STS, THS or AUX using the CHANNEL button.
TRIM AUX Servo 3 SUB-TRIM
125-0-125 “CLEAR”=0
L/F
R/B
MI
RATE
EXP
TRIM
EP
TRIM
AUX
Servo 3 SUB-TRIM
Press the INC+ or DEC- buttons
to adjust the centre position of
the AUX servo. If you have set
AUX 2P (2-point) the trim should
be set to 0. The available range
is -125 to +125 steps.
RATE
TRIM
L/F
R/B
AUX
TRIM
95
R/B
SUB-TRIM STS, THS and AUX
TRIM STS Steering SUB-TRIM
125-0-125 “CLEAR”=0
TRIM
STS
Steering SUB-TRIM
Press the INC+ or DEC- buttons
to adjust the centre position of
the steering servo over -125 to
+125 steps.
STS
TRIM
L/F
%
5
TRIM
L/F
TRIM THS Throttle/brake SUB-TRIM
125-0-125 “CLEAR”=0
TRIM
THS
Throttle/brake SUB-
TRIM
Press the INC+ or DEC-
buttons to adjust the centre
position of the throttle/brake
servo over -125 to +125 steps.
THS
X
EXP
TRIM
L/F
%
TRIM
45
R/B
