45
GBC “Eb” Emergency Steering Button
GBC “2P” = Servo 3 2-point non-proportio-
nal function
Momentary button “C”
Defining the GBC Momentary Button System Mode
(Set-up Mode)
If the momentary security function is selected in the GBC
“Eb” menu, the security function can be triggered using
the momentary button “C”.
Eb
GBC
RATE
EXP
TRIM
L/F
R/B
%
V
„Eb“:
maximum steering
travel (Emergency Steering
Button) Pressing button “C”
automatically switches travel
reduction RATE STG to
RATE STM.
The GBC “Eb” function overrides any travel reductions
you have set in the RATE STG menu, and switches
automatically to the Master steering travel you have
selected in the RATE STM menu.
The effect is that maximum programmed Master steering
travel is automatically available for as long as you hold
the momentary button “C” pressed in with your thumb.
Under certain circumstances this switching facility can
prevent a crash in or before a turn, and also allows you
to exploit extreme steering travels to make a rapid course
correction to recover from a driving error.
The 2-point non-proportional servo function is only active
if you have already selected the function AUX “2P” using
the INC+ or DEC- buttons in the Servo 3 AUX menu
(System Mode).
Press the MODE button once to reach the GBC menu.
Press the INC+ button repeatedly to select the GBC “2P”
menu. Switch the transmitter OFF/ON briefly to activate
the menu GBC “2P”. Servo 3 can now be switched
between the two programmed end-points using button
“C”.
AUX „2P“:
If AUX is set to
“2P”, the screen shows “2P”
instead of “0”, and button “C”
is used to control the 2-point
non-proportional function
(Servo 3).
2P
AUX
RATE
EXP
TRIM
R/B
EProcedure for setting GBC “Eb” Emergency
Steering Button
Procedure for setting GBC “2P” = Servo 3 2-
point non-proportional function
1. Press MODE and switch transmitter ON to reach Sy-
stem Mode.
2. Press the MODE button to reach the Servo 3 menu
AUX.
3. Press the INC+ button to select the 2-point non-pro-
portional function AUX 2P.
4. Press the MODE button once to reach the Momentary
Button Select menu GBC.
5. Switch the transmitter OFF/ON briefly to store the
button configuration GBC 2P.
GBC “0” = Button “C” off (factory default
setting)
GBC „0“:
T
Button “C” has no
function (factory default
setting).
I I
0
GBC
RATE
EXP
TRIM
L/F
R/B
%
V
GBC „2P“:
Momentary button
“C” as 2-point non-proportio-
nal function Servo 3 active
I I
2P
GBC
RATE
EXP
TRIM
L/F
R/B
V
1. Press MODE and switch transmitter ON to reach Sy-
stem Mode.
2. Press the MODE button repeatedly to reach the GBC
menu.
3. In the GBC menu activate the security mode GBC
“Eb” using the INC+ or DEC- buttons.
4. Switching the transmitter OFF/ON briefly stores the
momentary security emergency button.
5. If you now hold the momentary button “C” pressed in
with your thumb, any reduced steering travel selected
in the RATE STG menu is automatically ignored.
Steering travel is switched to the maximum servo
travel set in Master RATE STM.
