42
AUX function: Defining servo 3 Rocker Button A (System Mode)
RATE
EXP
TRIM
L/F
R/B
%
V
REV . NORM
RATE
EXP
TRIM
L/F
%
V
AUX function Servo 3 enables you to select
the function assigned to the 2-way rocker
button “A”:
If you select function “0”, the 3rd channel is controlled
solely via the mixer system “MIX”. If you set the MIX
functions to “0”, the 3rd channel has no function.
If you select the non-proportional function “2P”, the 3rd
channel is controlled as a 2-point non-proportional
function using button “A”; the servo only moves between
the two end-points.
If you select the proportional function “LN” the 3rd
channel is controlled proportionally by button “A”.
Caution: The programmed values are not accepted in
System Mode until you switch the transmitter OFF/ON
briefly.
RATE
REV .
LN
AUX
AUX display in System Mode
0
AUX
X
M
RATE
%
AUX
2P
2-way rocker button “A”
switched off
. Servo 3 is actuated
only via MIX throttle/brake function
and/or steering function
2-way rocker button “A” controls the
end-points of servo 3 as an auxiliary
function
2-way rocker button “A” provides
linear control of servo 3 as a pro-
portional servo, moving it to the
desired position within its travel.
Throttle/brake lever
This is the procedure for accessing the AUX
function in System Mode:
1. Pressing the MODE button and switching the
transmitter on takes you to System Mode, and into
the previously selected model memory.
2. Press the MODE button repeatedly to select the AUX
menu (servo 3).
3. Use the INC+ or DEC- buttons to select the desired
3rd servo function LN (linear), 2P (2-point non-pro-
portional function) or 0 (mixer function for brake).
4. Switching the transmitter OFF/ON briefly accepts the
set parameter into the selected model memory.
L/F
R/B
%
V
REV . NORM
RATE
EXP
TRIM
L/F
R/B
%
V
REV . NORM
RATE
EXP
TRIM
R/B
%
V
REV . NORM
M
RATE
EXP
TRIM
L/F
R/B
%
V
EP
MI
RATE
EXP
TRIM
L/F
%
V
REV . NORM
EP
RATE
EXP
TRIM
L/F
R/B
%
V
REV . NORM
AUX 0
Button “A” without
function. Servo 3 is controlled
by the throttle/brake lever and/
or the steering function, using
a mixer selected in Set-up
Mode.
AUX 2P
Servo 3 is operated
as a 2-point non-proportional
function using the 2-way rocker
button “A” / “C”. Servo 3 can be
influenced by the throttle/brake
lever and/or the steering
function, using a mixer selected
in Setup Mode.
AUX LN
Servo 3 is
controlled proportionally using
the 2-way rocker button “A”.
Servo 3 can be influenced by
the throttle/brake lever and/or
the steering function, using a
mixer selected in Setup Mode.
