33
Electronic trim, throttle
Electronic trim, steering
ON/OFF switch
Steering wheel return
spring adjustment
screw
Throttle/brake lever
Momentary button C
Aerial
LCD screen
Input buttons
Electronic digital adjustor B
(rocker button B)
Steering wheel
Charge socket
(for rechargeable
batteries only)
Electronic digital adjustor A
(rocker button A)
Transmitter controls
ender Bedienelemente
Note
: the maximum current capacity of the BEC system
is 1 A!
If you wish to use powerful servos drawing a high current
the BEC system must not be used, since overloading
the circuit will immediately wreck the receiver and the
servos connected to it. If powerful servos are to be used,
e.g. high-performance digital servos, the BEC system
must be disabled by plugging a receiver battery into any
servo socket (1 - 3).
Battery compartment
Description of receiving system
The receiver features a Syn-
thesizer system which allows
you to set the channel of your
choice within the range Ch 50
to Ch 92. The channel is set
using a small screwdriver
(front channel disc x 10, rear
channel disc x 1).
If you wish to use a different FM receiver, e.g. C6 FM,
the transmitter must be set to the channel corresponding
to the crystal installed in the receiver.
Empfänger SB6SYN
