Sub-As
arts Needed: 1 – Lever Linkage
2 – ¼” Nylock Nut
NOTE: Before connecting the Lever Linkage, make sure the shor
slant) of the Linkage is down, and the longer “leg” is up).
¾
Place two 35mm connector bolts through the bottom and mi
¾
Next, place a flat washer on the end of each bolt.
¾
sembly 9: Attaching the Lever Linkage
P
2 – ¼” x 35mm Connector Bolt (shortest)
4 – ¼” Flat washer
ter “leg” (before the diagonal
ddle holes of the Lever Linkage.
Now put the bolts through the end holes of the Rear Upper and Lower Speed Control Levers.
¾
Place a flat washer and nylock nut on the end of each bolt
tig
NOTE:
Tighten these nylock nuts just enough to hold the washer a
allow it to turn with your finger.
35mm connector
bolt
Lever Linkage
and
hten.
gainst the wood, but loose enough to
1
nut
/4 nylock
1/4 flat washer
26
