22
foot pedal
platform
1/4 square
nut
35 mm connector
bolt
Sub-Assembly 5: Attaching Platform and Bracket
Parts Needed: 1 – Foot Pedal Platform
1 – Lamp Holding Bracket
4 – ¼” x 35 mm Connector Bolts (shortest)
4 – Square Nuts
First push the four square nuts into their slots, two on the Foot Pedal Platform, and two on
Lamp Holding Bracket (this will be a tight fit). To help them seat completely, you can turn the
platform/bracket over and use a desk or table top to finish pushing them in.
With the square nut hole lining up with the bolt hole, put the Platform and Bracket into place as
pictured (the hole in the Lamp Holding Bracket should be facing toward the outside, with the cu
facing up.
Thread the ¼” x 35 mm bolts through the handles and into the square nuts..
Follow this process in attaching the Lamp Holding Bracket. As you do, be sure the hole in the
Lamp Holding Bracket is facing outward with the washer ring side up (see diagram).
lamp holding
bracket
¾
th
¾
tout
¾
¾
e
