24
-As
arts Needed: 1 – Right Gear Linkage
1 – ¼” Nylock Nut
e Right Main Handle.
NOTE:
Tighten this nylock just
enough to hold the washer against the
wood, but loose enough to allow it to
turn with your finger.
NOTE:
Be sure the teeth on the
gear linkages stay lined up with each
other. If they slip out of alignment, the
carriage assembly will not function
properly. (see illustration on next page
for proper “alignment” of teeth).
Sub
sembly 7: Attaching Right Gear Linkage
P
1 – ¼” x 45mm Connector Bolt
2 – ¼” Flat washer
¾
Place the Right Gear Linkage onto the 45mm connector bolt as pictured.
¾
Put a flat washer on the end of the bolt coming through the gear.
¾
Next place the remaining end of the bolt through the hole in th
¾
With the end of the bolt coming through the Right Main Handle, secure it by placing a flat washer
and nylock onto the end of the bolt, and tighten
¾
¾
1/4
1/4 nylock
nut
45 mm
connector
bolt
flat washer
Right Gear
Linkage