Sub-Assembly 4: Connecting the Handles
arts Needed: 1 – Right and Left Handle Assembly
2 – ¼” x 45mm Connector Bolt
2 – ¼” Flat washers
2 – ¼” Nylock Nut
Line up the hole in the top of the Lower Rear Handle with the second hole from the back on the
Main Handle. They should almost line up automatically.
Insert 45mm connector bolts through the Left and Right Handle pairs. Make sure they are going
from the outside to the inside.
Place a ¼” flat washer and ¼” nylock nut onto the end of each bolt. Completely tighten the
nylocks.
ly 4: Connecting the Handles
arts Needed: 1 – Right and Left Handle Assembly
2 – ¼” x 45mm Connector Bolt
2 – ¼” Flat washers
2 – ¼” Nylock Nut
Line up the hole in the top of the Lower Rear Handle with the second hole from the back on the
Main Handle. They should almost line up automatically.
Insert 45mm connector bolts through the Left and Right Handle pairs. Make sure they are going
from the outside to the inside.
Place a ¼” flat washer and ¼” nylock nut onto the end of each bolt. Completely tighten the
nylocks.
45mm connector
bolt
1/4 flat
washer
1/4 nylock
nut
P
P
¾
¾
¾
¾
¾
¾
21