b-Assembly 3: Right Handle Structure
Su
arts Need
¾
¾
¾
¾
P
ed: 1 – Right Main Handle
2 – ¼” x 50mm Connector Bolt
2 – ¼” Flat washers
2 – ¼” Nylock Nut
Pair the Right Main Handle and Lower Rear Handle together as pictured. With the Right Main
Handle on the outside, line up the holes at the bottom and place the inside the walls of the Top Plate.
Insert 50mm connector bolts into the inside wall, through the handles and out the other wall.
Place a ¼” flat washer and ¼” nylock nut on each bolt.
Completely tighten the nylocks on both bolts.
Right Handle Structure
1 – Rear Lower Handle
Handle
bolt
50mm connector
1/4 flat
washer
1/4 nylock
nut
Right Main
Lower Rear
Handle
20
