7
The Grace Machine Quilter
Instructions For Assembly & Use
Before You Begin
¾
Using the parts list as a reference, take the parts out of both boxes and make sure that you have them all. (If
there is something missing or broken, contact the Grace Company. We will promptly ship any needed item).
NOTE: The dowels are packaged inside the aluminum rails.
“This is a new product! We welcome your feedback on this product or these instructions. If you
encounter a problem during assembly or use of the Grace Machine Quilter, and you can’t seem to
overcome it, call us before frustration sets in! 1-800-264-0644.”
--Grace
NOTE! Read each step all the way through before actually assembling parts in that step.
¾
Identify Hardware Packets:
--Main Hardware Packet (M)
--Carriage Assembly Hardware Packet (C)
¾
For ease in identifying bolts, keep the “C” packet sealed until
you work on the Carriage Sub-Assemblies.
¾
Because the connector bolts are so close in length, to assist in
distinguishing the different sizes, we recommend standing them on
end and grouping them according to length.
Tools Needed
¾
Alan Wrench
(Provided for use with all connector bolts)
¾
½” Socket or Combination Wrench
¾
7/16” Socket or Combination Wrench
Note: To help you distinguish wood parts, all end pieces are
marked with an “L” or “R” grooved into the wood on the
inside of the part.
Step 1: Attaching Legs to Frame Ends
Parts Needed:
1 – Left Front Leg
1 – Left Frame End
1 – Left Back Leg
1 - Right Frame End
1 – Right Front Leg
1 – Alan Wrench
1 – Right Back Leg
8 – ¼” x 35mm Connector Bolts (shortest)
¾
The Right Frame End will be connected to the
outside
of the
two right legs using two connector bolts each.
¾
Line up the front and back legs to the Right Frame End.
NOTE: be sure the “R’s” are all facing the same direction.
¾
Place the connector bolts through the holes from the outside
of the Frame End.
¾
Thread the bolts into the legs. The leg holes contain a metal
insert that will receive the threaded bolt.
¾
Using the Alan Wrench, tighten the Connector Bolts in all four bolts.
¾
Repeat this process for the Left Frame End.
Inside View
Right Side
Front of
Frame
Back of
Frame
35mm connector bolt
Left Assembly
Inside View
Front of
Frame
Back of
Frame
35mm connector bolt