Sub-Assembly 8: Attaching the Rear Upper Speed Control Lever
onnector Bolt
2 – ¼” Flat washer
Lever as
place a flat washe
Right Ma H
nylock nut
ainst the wood, but loose enough to allow it
Parts Needed: 1 – Rear Upper Speed Control Lever
1 – ¼” x 45mm C
1 – ¼” Nylock Nut
¾
Place a 45mm connector bolt through the corner hole of the Rear Upper Speed Control
pictured.
¾
With the end of the bolt coming through the lever,
insert the bolt with lever and washer through the hole in the
¾
On the remaining end of the bolt, place a flat washer and
NOTE:
Tighten this nylock just enough to hold the washer ag
to turn with your finger.
r on the end of it and then
andle.
in
and tighten.
45mm connec
bolt
1/4 flat
Rear Upper Sp
Control Lever
eed
tor
1/4 nylock
nut
washer
25
