Step 13: Table Top Assembly
Parts Needed: 1 – Table Left Side
1 –Table Middle Section
1 –Table Right Side
18 – ¼” x 45mm Connector Bolts
18 – Rectangle Nuts
1 – Alan Wrench
¾
For queen size assembly, all
three Table Sections will be used.
For crib size, the center Table Leaf
will be omitted.
¾
The Left Side is the one
with the slots. The Right Side
has circular holes.
e table side of
t
ht
Side at the right of the frame.
s to
the Brace Assembly using 45 mm
c
¾
Standing at th
he frame, lay these pieces onto the
Brace Assembly as pictured,
beginning with the Table Rig
¾
Connect the Table section
onnector bolts and rectangle nuts.
¾
Completely tighten
each connector bolt using
the Alan wrench.
¾
Referring to the
illustration on the left, be
sure you put a connector
bolt through each hole
on the Table Tops.
Queen size
45mm connector
rectangle nut
Crib Size
bolt
16
