GMC 2000 Safari Owner'S Manual Download

Page: 338 / 391

Short Trip/City Scheduled Maintenance

7-14

30,000 Miles (50 000 km) Continued

j For Two

Wheel

Drive vehicles only: Clean and repack the front wheel

bearings (or at each brake relining, whichever occurs first).

j Replace fuel filter.

An Emission Control Service. (See footnote

[.)

j Replace engine air cleaner filter.

An Emission Control Service.

j Change automatic transmission fluid and filter if the vehicle is mainly driven

under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly reaches

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

If you do not use your vehicle under any of these conditions, change the fluid
and filter every 50,000 miles (83 000 km).

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper

rotation pattern and additional information. (See fo.)

Summary of Contents for 2000 Safari







































































































































































































































































































































































































Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands

GMC 2000 Safari, Owner'S Manual

Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands