manualshive.com logo in svg

GMC 2000 Safari, Owner'S Manual

The GMC 2000 Safari Owner's Manual is a comprehensive guide that provides step-by-step instructions and valuable information on operating and maintaining your vehicle. With a user-friendly format, this manual is available for free download at manualshive.com, allowing you to access it conveniently and keep your Safari running smoothly.

Share
Download
background image

6-49

CAUTION:

Using the wrong replacement wheels, wheel bolts
or wheel nuts on your vehicle can be dangerous.
It could affect the braking and handling of your
vehicle, make your tires lose air and make you
lose control. You could have a collision in which
you or others could be injured. Always use the
correct wheel, wheel bolts and wheel nuts 
for replacement.

NOTICE:

The wrong wheel can also cause problems with
bearing life, brake cooling, speedometer or
odometer calibration, headlamp aim, bumper
height, vehicle ground clearance and tire or tire
chain clearance to the body and chassis.

See “Changing a Flat Tire” in the Index for 
more information.

Used Replacement Wheels

CAUTION:

Putting a used wheel on your vehicle is
dangerous. You can’t know how it’s been used or
how far it’s been driven. It could fail suddenly
and cause an accident. If you have to replace a
wheel, use a new GM original equipment wheel.

Summary of Contents for 2000 Safari








































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2000 Safari

Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
iArmor EDGE IA-N098 Quick Start Manual preview
EDGE IA-N098
Brand: iArmor Pages: 4
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16

Brands by name

Popular brands

Load more brands