GMC 2000 Safari Owner'S Manual Download Page 227

Page: 227 / 391

5-6

8. Now connect the

black negative (

) cable

to the good battery’s
negative (

) terminal.

Don’t let the other end
touch anything until the
next step.

9. The other end of the negative (

) cable does not go

to the dead battery. It goes to a negative jump
starting stud located near the battery.

The electrical connection is just as good there, but
the chance of sparks getting back to the battery is
much less.

10. Now start the vehicle with the good battery and run

the engine for a while.

11. Try to start the vehicle with the dead battery. If it

won’t start after a few tries, it probably needs service.

12. Remove the cables in reverse order to prevent

electrical shorting. Take care that they don’t touch
each other or any other metal.

A. Negative Jump Starting Stud

B. Good Battery

C. Dead Battery

Summary of Contents for 2000 Safari







































































































































































































































































































































































































Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands

GMC 2000 Safari, Owner'S Manual

Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands