GMC 2000 Safari Owner'S Manual Download Page 295

Page: 295 / 391

6-40

6. Remove the

composite assembly.

7. Turn the halogen bulb counterclockwise to remove

from the assembly.

8. Install the new bulb into the composite assembly by

turning it clockwise until it is completely tightened.

9. Replace the composite assembly by installing and

tightening all of the screws previously removed.

Front Turn Signal Lamps

1. Remove the two screws at the inside edge of the

parking/turn signal lamp assembly.

2. Remove the

lamp assembly.

3. Squeeze the tab on the side of the lamp socket while

turning the socket counterclockwise.

4. Pull the socket out of the lamp assembly.

5. Pull the bulb from the socket.

6. Gently push the new bulb into the socket.

7. Put the socket back into the lamp assembly and turn

it clockwise until it locks.

8. Put the parking/turn signal lamp assembly back into

the vehicle and tighten the screws.

Summary of Contents for 2000 Safari







































































































































































































































































































































































































Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands

GMC 2000 Safari, Owner'S Manual

Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands