GMC 2000 Safari Owner'S Manual Download Page 47

Page: 47 / 391

1-35

3. If the belt stops before it reaches the buckle, tilt the

latch plate and keep pulling until you can buckle it.
Pull up on the latch plate to make sure it is secure.

If the belt is not long enough, see “Safety Belt
Extender” at the end of this section.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

4. To make the lap part tight, pull down on the buckle

end of the belt as you pull up on the shoulder part.

Summary of Contents for 2000 Safari







































































































































































































































































































































































































Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands

GMC 2000 Safari, Owner'S Manual

Search results

Summary of Contents for 2000 Safari

Reviews:

Related manuals for 2000 Safari

Brands by name

Popular brands