manualshive.com logo in svg

GMC 2000 Safari, Owner'S Manual

The GMC 2000 Safari Owner's Manual is a comprehensive guide that provides step-by-step instructions and valuable information on operating and maintaining your vehicle. With a user-friendly format, this manual is available for free download at manualshive.com, allowing you to access it conveniently and keep your Safari running smoothly.

Share
Download
background image

5-7

Towing Your Vehicle

CAUTION:

To help avoid serious personal injury to you 
or others:
D Never let passengers ride in a vehicle that is

being towed.

D Never tow faster than safe or posted speeds.

D Never tow with damaged parts not 

fully secured.

D Never get under your vehicle after it has

been lifted by the tow truck.

D Always secure the vehicle on each side with

separate safety chains when towing it.

D Use only the correct hooks.

NOTICE:

Use the proper towing equipment to avoid
damage to the bumper, fascia or fog lamp areas
of the vehicle.

With current trends in automotive styles and design, it is
essential that the correct towing equipment is used to
tow a vehicle. Your vehicle can be towed with wheel

-

lift

or car

-

carrier equipment. When using wheel

-

lift

equipment on a vehicle with All

-

Wheel

-

Drive, you must

use a dolly under the rear wheels when towing from the
front and under the front wheels when towing from the
rear. On Rear

-

Wheel Drive vehicles observe the

following tow limits of 35 mph (56 km/h) for 
50 miles (80 km).

Consult your dealer or a professional towing service if
you need to have your vehicle towed. See “Roadside
Assistance” in the Index.

Engine Overheating

You will find an engine coolant temperature gage on
your vehicle’s instrument panel. See “Gages” in 
the Index.

Summary of Contents for 2000 Safari








































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2000 Safari

Yakima K343 Manual preview
K343
Brand: Yakima Pages: 11
Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
Kia Optima 2004 Owner'S Manual preview
Optima 2004
Brand: Kia Pages: 233
Mercedes-Benz ML 320 CDI Operator'S Manual preview
ML 320 CDI
Brand: Mercedes-Benz Pages: 585
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
SMART EQ forfour 2018 Owner'S Manual preview
EQ forfour 2018
Brand: SMART Pages: 224
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Buick Automobille 2004 Century Getting To Know Manual preview
Automobille 2004 Century
Brand: Buick Pages: 12
PowerMadd Tri-Mount 34269 Mounting Tips preview
Tri-Mount 34269
Brand: PowerMadd Pages: 2
Ericsson M-RK 344A4616P1 Installation & Operator'S Manual preview
M-RK 344A4616P1
Brand: Ericsson Pages: 28
Jeep RENEGADE 2023 Quick Manual preview
RENEGADE 2023
Brand: Jeep Pages: 52

Brands by name

Popular brands

Load more brands