PART THREE - OPERATION
SECTION 4 - ANALYZER CONFIGURATION
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
Rev. 1-201
44
SET SENSOR Data
1.
With the
screen displayed, use
Ø
Ø
key
to select the “SELECT SENSOR” line.
2.
Press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to select the type
of sensor and mounting arrangement you are using:
•
GLI PIPE MOUNT --- for sensor installed in pipe using weldolet,
pipe saddle or ball valve assembly
•
GLI POLYPROP/T -- for polypropylene sensor mounted in tee
•
GLI PVDF/T ----------- for PVDF sensor mounted in tee
•
GLI 316SS/T------------ for stainless steel-sleeved sensor with
2-inch NPT hex adapter mounted in tee
•
GLI BRASS/T--------- for brass-sleeved sensor with 2-inch NPT
hex adapter mounted in tee
•
NON-GLI Sensor----- for another manufacturer’s sensor that has
a 0-2000 Hz. output (any mounting)
4.
With the appropriate choice displayed, press
ENTER
key
to enter this selection.
CAUTION:
WHEN REPLACING A SENSOR, ALWAYS MAKE
SURE THAT CORRECT CONFIGURATION DATA IS
ENTERED FOR THE NEW SENSOR. IF CONFIGURED
DATA DOES NOT MATCH THE SENSOR, MEASURE-
MENT READINGS WILL BE INACCURATE.
After the “SENSOR A” submenu screen re-appears, use
Ø
Ø
key
to select “SET SENSOR” line and press
ENTER key
.
Depending on the selected sensor, the sub-menu screen
will be:
GLI TEE MOUNT
GLI PIPE MOUNT
NON-GLI SENSOR
