PART THREE - OPERATION
SECTION 4 - ANALYZER CONFIGURATION
Rev. 1-201
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
45
☞
GLI Tee Mount Sensor Setup
(select TEE SIZE and TEE MATERIAL)
1.
With the
submenu screen displayed
and the “TEE SIZE” line selected, press
ENTER key
to
display a screen like
. Use
Ø
Ø
and
×
×
keys
to select the tee size in which the sensor is
mounted:
•
0.5 INCHES
•
1.25 INCHES
•
3.0 INCHES
•
0.75 INCHES
•
1.5 INCHES
•
4.0 INCHES
•
1.0 INCHES
•
2.0 INCHES
•
1 IN. MHF15L2*
•
2.5 INCHES
* Select only when using a GLI PVC 1-inch MHF15L2 tee for higher flow range
(up to 65 GPM).
2.
With the appropriate tee size displayed, press
ENTER
key
to enter this selection.
3.
After the
submenu screen re-appears,
use
Ø
Ø
key
to select the “TEE MATERIAL” line, and
press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to select the tee
material, and press
ENTER key
to enter this selection.
NOTE:
Selected tee size determines available tee
materials.
This completes tee-mount sensor data entry/calibration.
