Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
Rev. 1-201
6
CONDENSED OPERATING INSTRUCTIONS
D. SETTING FLOW RATE READOUT -- (continued)
3.
Use
Ø
Ø
key
to select the “SENSOR A” line, and press
ENTER key
to display
.
4.
With the “SET MULTIPLIER” line selected, press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view the choices (x1, x10, x100, x1000, or x10000).
With the desired choice displayed press
ENTER key
to enter this selection.
5.
After the “SENSOR A” screen re-appears, use
Ø
Ø
key
to select the “SET DECIMAL” line, and
press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view the
choices (XXXX, XXX.X, or XX.XX). With the desired choice displayed, press
ENTER key
to enter
this selection.
6.
After the “SENSOR A” screen re-appears, use
Ø
Ø
key
to select the “FLOW UNITS” line, and
press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view all
choices. With the desired choice displayed, press
ENTER key
to enter this selection.
E. SETTING VOLUME READOUT (volume unit annunciator and totalizer reset mode)
Unlike flow rate, volume is shown only as a whole number without a multiplier.
Choose from a
variety of volume measurement unit annunciators. The totalizer is factory-set for auto reset, which
resets the displayed volume to zero after reaching its maximum limit. After automatically resetting,
the totalizer starts a new count. Conversely, the totalizer can be set to a manual reset mode to pre-
serve the total volume. In the manual reset mode, the totalizer can be manually reset back to zero at
any time by using the “RESET VOL” function in the TEST/MAINT menu.
1.
With the
screen displayed, use
Ø
Ø
key
to select the “VOLUME UNITS” line, and
press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view all
choices. With the desired choice displayed, press
ENTER key
to enter this selection.
2.
After the “SENSOR A” screen re-appears, use
Ø
Ø
key
to select the “TOTALIZER MODE” line,
and press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view
both choices (AUTO RESET or MANUAL RESET). With the desired choice displayed, press
ENTER key
to enter this selection.
(continued on next page)
