PART THREE - OPERATION
SECTION 1 - USER INTERFACE
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
Rev. 1-201
30
P A R T T H R E E - O P E R A T I O N
S
ECTION
1
1.1 Display
The user interface consists of an LCD display and a keypad
with
MENU
,
ENTER
,
ESC
,
Õ
Õ
,
Ö
Ö
,
×
×
,
and
Ø
Ø
keys
.
By using the keypad, you can display three types of
screens:
•
MEASURE Screen:
The normal display mode which
shows measured values. Pressing the
Ö
Ö
or
Õ
Õ
key
sequentially shows up to 18 different readouts (depend-
ing on number of sensors being used):
Separate Sensor Readouts
Combined Data Readouts
SENSOR A flow rate (with multiplier)
Sensor A flow rate and volume
SENSOR B flow rate (with multiplier)
Sensor B flow rate and volume
SENSOR C flow rate (with multiplier)
Sensor C flow rate and volume
SENSOR D flow rate (with multiplier)
Sensor D flow rate and volume
SENSOR A volume (no multiplier)
Sensor A and B flow rates
SENSOR B volume (no multiplier)
Sensor A and B volumes
SENSOR C volume (no multiplier)
Sensor C and D flow rates
SENSOR D volume (no multiplier)
Sensor C and D volumes
Calculated Measurement Readout
Also, pressing the
Ø
Ø
or
×
×
key
changes the display’s
bottom auxiliary line (in reverse video) to show:
➥
Analog Output 1 value (mA).
➥
Analog Output 2 value (mA).
An example of a typical MEASURE screen is:
On the MEASURE screen’s top line, RELAY A, B, C, and
D annunciators will appear when their relay operational
state changes. When a relay overfeed timer is used and
it has “timed out,” the respective relay annunciator con-
tinuously blinks until the overfeed condition is resolved.
USER INTERFACE
