PART THREE - OPERATION
SECTION 8 - HART OPTION
Rev. 1-201
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
89
Viewing
Identification (ID)
Viewing Revisions
3.
Assign a date.
4.
Press the
F4 key
to enter the date, and the
F2 key
to
send the date to the analyzer.
The “Device id” information screen shows the number that
uniquely identifies the analyzer. The ID number cannot be
changed by the communicator (master).
1.
With the “GLI SETUP” top-level menu screen dis-
played, select “DEVICE INFO” line and press
key
.
2.
With the “DEVICE INFO” submenu screen displayed,
select the “Device id” line and press the
key
to dis-
play its related information screen.
3.
Press the
F4 key
to return to the “DEVICE INFO” sub-
menu screen.
The “DEVICE REVISION” line enables access to three revi-
sion level information screens:
•
Universal Rev: Revision of the universal device
description that the analyzer conforms to.
•
Fld Device Rev: Revision of the analyzer-specific
description that the analyzer conforms to.
•
Software Rev: Revision of the software (firmware)
that is embedded in the analyzer.
1.
With the “GLI SETUP” top-level menu screen dis-
played, select “DEVICE INFO” line and press
key
.
2.
With the “DEVICE INFO” submenu screen displayed,
select the “Device revision” line and press the
key
.
3.
With the “DEVICE REVISION” sub-submenu screen
displayed, select the appropriate line and press the
key
to display its related information screen.
4.
Press the
F4 key
to return to the “DEVICE INFO” sub-
menu screen.
