PART THREE - OPERATION
SECTION 4 - ANALYZER CONFIGURATION
Rev. 1-201
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
51
Select DISPLAY FORMAT
(decimal/multiplier)
Choices for the calculated measurement display format are
dependent on the selected formula and measurement.
X-Y or X+Y (using flow variables)
The display format choices include setting a multiplier and
decimal.
1.
After the
screen re-appears, use
Ø
Ø
key
to select the “DISPLAY FORMAT” line, and press
ENTER key
to display
.
2.
With the “SET MULTIPLIER” line selected, press
ENTER key
to display a screen like
.
Use
Ø
Ø
and
×
×
keys
to view all choices (x1, x10, x100,
x1000 or x10000). With the desired choice displayed,
press
ENTER key
to enter this selection.
3.
After the
screen re-appears, use
Ø
Ø
key
to select the “SET DECIMAL” line, and press
ENTER
key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view all choices (XXXX, XXX.X or
XX.XX). With the desired choice displayed, press
ENTER key
to enter this selection.
X-Y or X+Y (using volume variables)
There are no display format choices since volume is always
displayed without a multiplier and without a decimal.
