Giken GSK Series, Instruction Manual, Page: 70 / 109

69
You can update the display data by long press of the "←" button.
７－１３（
Fn.03
）
Input and output monitor
Number Unit number Matter Setting range
Fn3-00 to 19
Un.0
Display the internal state of
the GSK-IF
[No.0 ~ No.12]: check the network status
[No.14, No.15]: GSK-IF alarm display
[Other than those described above]: Preliminary
Un.1 to 7
Display the input and
output signals of
communication with the
PLC
[No.0-No.5]: the contents of the input signal 0 to 5
[No.6-No.19]: the contents of the output signal 0 to 13
※
Attention point of the input-output monitor
The signal monitor display is a hexadecimal display.
Please do the following change to convert it to parallel I/O data.
・
4 digits of displayed contents are changed from a hexadecimal number to a binary number.
Right end of the value after a change (LSB) is equivalent to IN 0/OUT 0.
It is incremented by one in accordance as the advance on the left sidet, it will be the IN 15 / OUT 15.
If the corresponding digit isn’t calculated as "0".