Giken GSK Series, Instruction Manual, Page: 107 / 109

106
５
.Selecting transmission data
It is possible to set each data to be transmitted or not to be transmitted, specifying figure number, with or without
decimal point to the parameter if necessary. If there are some items which are not transmitted, the following items
are transmitted shortening the items not to be transmitted.
６．
Transmission of torque, time, angle data based on the kinds of operation
Transmission of torque data,time data and angle data, data of only one kind of operation is transmitted even if
many kinds of operation such as pretightening, real tightening, etc. are carried out within the same block. Selection
with kinds of operation is effected automatically basing on the following order of priority. When the operation with
higher priority is not carried out, it select the operation of following order of priority. In case of carrying out same
kind of operation more than two times within the same block, the last operation is selected.
Order of priority
（
high
） １：
Real tightening
２：
Reverse tightening
３：
Pretightening
（
low
） ４：
Socket fitting