Giken GSK Series, Instruction Manual, Page: 51 / 109

50
７．
Setting function details
７－１
Fn. ** Display setting function list
It can set internal data and modify and monitor at the panel surface of the GSK controller.
Select data Matter of display data Remarks
Fn0-00 status of 2-axis motion Special display
Fn 0-01 I / O status
Display in the code the state of the DI
and DO
Fn 0-02 Product Model "021.0xx" xx is No. N upper two digits
Fn 0-03 Firm-ware program number
―
Fn 0-04 Firm-ware version number
―
Fn 0-05 At the time, minutes, and seconds It displays the current time
Fn 0-06 date It displays the date
Fn 1-00
～
42
The first axis of the screw tightening
result monitor
―
Fn 2-00
～
42
The second axis of the screw
tightening result monitor
―
Fn 3-00
～
19 M-Net input / output monitor
―
Fn 4-00
～
01 Printer output settings (Note 1)
Fn 5-01
～
30 Setting the unit number (Note 1)
Fn 6-00
～
19 Setting of the I / F parameter (Note 1)
Fn 7-00
～
03 Setting the ID controller (Note 1)
Axx-yy Parameter of the "SOC.T" operation xx < 50 , yy < 16: (Note 1)
Lxx-yy Parameter of the "PRET" operation xx < 50 , yy < 32: (Note 1)
Gxx-yy Parameter of the "REV.T" operation xx < 50 , yy < 16: (Note 1)
Hxx-yy Parameter of the "REA.T" operation xx < 50 , yy < 48: (Note 1)
Uxx-yy Parameter of the "RATE" operation xx < 30 , yy < 10: (Note 1)
Xxx-yy
Parameter of the "X-axis RATE"
operation
xx
＜
30
，
yy
＜
16: (Note 1)
Yxx-yy
Parameter of the "Y-axis RATE"
operation
xx
＜
30
，
yy
＜
16:
（
Note 1)
Pu.xxx.y
XY position movement point
coordinates
u:1
～
4
，
xxx
＜
288
，
y
＜
2 (Note 2)
d0xxxx Any data monitor of the 1th-axis
3 < xxxx
≦
200: Can be changed
(Note 3)
d1xxxx Any data monitor of the 2th-axis
3 < xxxx
≦
200: Can be changed
(Note 3)
r0xxxx The 1th axis of history data monitor Address of FRAM , Data of 0xxxxh
r1xxxx The 2th axis of history data monitor Address of FRAM , Data of 1xxxxh
※
Note 1: When the data selection mode, the data sent to the controller in the long press
"←".
※
Note 2: u is the unit number, xxx is point number, X coordinate in the y = 0, Y coordinate in the y = 1.
xxx> = 255 data limit coordinate data
※
Note 3:At time of data selection mode, it
save the data of xxxx <200 in the long press of the "←"