Revolving door TSA 325 NT
54
Options
X
Support the side elements (1) in the H profile with
glazing packers (2) at the joint.
X
Ensure that the gap (x) is a minimum of 2–3 mm
wide on the inside in order to ensure sufficient
sealing.
X
Use a sufficient amount of silicone (3) on the joint
to the post (2–3 mm).
5.6.8 Placing in the ceiling glasses
4
3
2
5
1
1
First ceiling glass
2
Second ceiling glass
3
Top part clamping profile
4
Spacer
5
Bottom part clamping profile
X
Place the first ceiling glass (1) on the vertical
glass side panels.
X
Screw the top clamping profile (3) into the
spacer piece (4).
X
Place the second ceiling glass (2) with the top
part of the clamping profile (3) between the
glass halves on the vertical glass side panels
and screw in loosely.