Revolving door TSA 325 NT
38
Options
X
Remove the stress from the locking pin by turning
the adjustment screw (16) counterclockwise.
The adjustment screw (16) has to contact lightly.
The leaf latches into the BO lock.
X
Turn the adjustment screw (16) ¼ of a rotation
clockwise.
The opening assistance is pre tensioned.
The corresponding leaf (17) is always located to the right of the adjustment screw (16).
X
Loosen the fastening bolts (19) of the bosh angle (18).
X
Adjust the bosh angle using the threaded rod (20).
When the leaf latches in, the locking pin has to
latch into the contour of the bosh angle without
a perceptible play.
X
Tighten the fastening bolts (19).
X
Check whether the threaded rod (20) contacts
at the corner bracket (21).
