Revolving door TSA 325 NT
40
Options
Measuring the break-out force
Measuring devices:
à
Force measuring tool
à
Spring scale
X
Mark the measuring point (4) in accordance with
the adjacent drawing.
X
Measure the break-out force of the individual BO
leaf at the measuring point (4).
The maximum break-out force amounts to 220 N.
Adjusting the break-out force
X
If necessary, adjust the break-out force at the
adjustment screw (5).
Checking the EMERGENCY STOP function:
X
Checking the EMERGENCY-STOP push button.
X
Load the BO leaf.
The BO leaf may not break out.
Check the break-out angle
X
Check whether the drive is switched off after
a leaf break-out angle of 15°.
3
Central swivelling axis
4
Measuring point
5
Adjustment screw
5.2.6 Additional information for commissioning
X
Adjust the maximum speed in accordance with the wiring diagram.
X
Adjust the maximum acceleration so that the break-out door leaf does not break out at an EMERGENCY-STOP
during the acceleration phase. If necessary, increase the “distance of acceleration”.
X
If possible, connect revolving doors with break-out system to the façade on the canopy.
X
Attach a “Breakout” sticker to the leaf at a height of 1000 mm above the floor.
